Danapad V3 www.danalock.
3
2x 2x 4 5
x AAA 6 7
8 9
10 11
12 13
The following instructions are in english. Localized versions can be found with the QR-code below. guide.danalock.
Add the Danapad in the Danalock App Set up pin codes for your Danapad Open the Danalock App and add the Danapad by selecting ”Add device” in the menu tab. When the Danapad has been enrolled you can pair it with your Danalock. Go to: Menu > Accessory devices > Danapad > Pin codes and choose to add a new pin code. Go to: Menu > Accessory devices > Danapad > Pairing and select the lock you want to control with the Danapad.
Controlling the Danapad Dismounting The Danapad is ready to use when it has been paired with a Danalock or Universal Module and has been set up with one or more pin codes. Locking: Press pin code followed by lock button. Success will respond with a single green blink. Unlocking: Press pin code followed by unlock button. Success will respond with a single green blink.
LED-Signals Operations The keypad indicates the status of several operations with different colors: LED signal LED color Input action Turn on Danapad Insert batteries LED response Activate light only press unlock button Display lights up green Clear input Hold unlock button Display blinks red once Input timeout Input clears after 10 sec with no input Display blinks red once Danapad lockout 5 invalid attempts causes a 2 min lockout Display blinks red 3 times Incorrect pin code length Th
Firmware upgrade In the Danalock App navigate to your Danapad settings and select ”Firmware” and then ”Upgrade firmware”. Make sure to keep your phone near the Danapad during the entire firmware upgrade process.
Danalock International ApS Gammel Stillingvej 427C 8462 Harlev, DK +45 4242 8122 info@danalock.com www.danalock.
