Installation manual

Danaher Motion Kollmorgen Mounting
SERVOSTAR
®
S and SERVOSTAR
®
CD Series 6
SERVOSTAR Sx
Amplifier Model Sx03 Sx06 Sx10 Sx20
Unit Weight
lbs / Kgs 6.3 / 2.85 7.3 / 3.3 9.9 / 4.5
English (Metric) 10-32 (M4)
Mounting Hardware
Applied Torque 20 lb-in (2.26 N-m.)
BUS Screw
Size/Torque
6-32 / 12lb-in (1.35 N-m.)
Motor Screw
Size/Torque
6-32 / 12 lb-in (1.35 N-m.)
Connection Hardware
Ground Screw
Size/Torque
M4 / 12 lb-in (1.35 N-m)
Control Logic
(AWG/ mm
2
)
18/0.75
Motor Line
(AWG/ mm
2
)
14/2.5 10/4
Configurable I/O
wire gauge
22-18 AWG (0.3 - 0.75mm
2
)
Ferrules recommended: 18 AWG Type H0 - 75/14
Weidmuller 4629.0 or equivalent
20 AWG Type H0 - 5/14 Weidmuller 6907.0 or equivalent
22 AWG Type H0 – 34/12 Weidmuller 902577 or equivalent
Wire Size (AWG#)
Spade Terminals 16/14 AWG (1.5 mm
2
)
Hollingsworth XSS0954S OR SS20947SF or equivalent
12/10 AWG (4-6 mm
2
)
Hollingsworth XSS20836 OR SS20832F or equivalent
Side-to-Side No Distance Required
Clearance
Distance
Top/Bottom 2.5 in (63.5 mm.)
CK100 Kit Includes: C1, C2, C4, C7
(plus 2ft / 0.25m of stranded bus ribbon), C8
C3 Danaher Motion Kollmorgen #: A-93899-013
Vendor Info: Weidmuller BL3.5/13 Cat.No. 161574
C5 Danaher Motion Kollmorgen #: A-81014-004
Vendor Info: PCD ELFP04110
Mating
Connector
Hardware
Connector Screw
Torque
2.25 lb-in.