Installation manual

Danaher Motion Kollmorgen Mounting
SERVOSTAR
®
S and SERVOSTAR
®
CD Series 5
MOUNTING
For proper ventilation, the SERVOSTAR S or the SERVOSTAR CD and BUS
Module units should be mounted vertically. No horizontal distance between the
drive and BUS Module is required. In systems using more than two
SERVOSTAR unit
s per BUS Module, divide the drives equally on either side of
the BUS Module. These products are designed for mounting in an electrical
enclosure to protect them from physical and environmental damage.
Hardware Specifications
SERVOSTAR Cx
Amplifier Model Cx03 Cx06 Cx10
Unit Weight
Lbs./Kgs. 3.56/1.61 4.9/2.22 5.94/2.69
English (Metric) 10-32 (M4)
Mounting
Hardware
Applied Torque 20 lb-in. (2.26 Nm.)
Line Screw Size/Torque
BUS Screw Size/Torque
Motor Screw Size/Torque
Connection
Hardware
Ground Screw Size/Torque
M3.5/12 lb-in. (1.35 N-m.)
Control Logic (AWG/ mm
2
) 16 / 1.5
Motor Line (AWG/ mm
2
) 14 / 2.5
Main Input (AWG/ mm
2
) 14 / 2.5 12 / 4
Configurable I/O wire gauge 22-18 AWG (0.3-0.75 mm
2
) Ferrules recommended:
18 AWG Type H0 - 75/14 Weidmuller 4629.0 or equivalent
20 AWG Type H0 - 5/14 Weidmuller 6907.0 or equivalent
22 AWG Type H0 – 34/12 Weidmuller 902577 or equivalent
Wire Size
(AWG#)
Spade Terminals 16/14 AWG (1.5 mm
2
): Hollingsworth XSS0954S OR
SS20947SF or equivalent
12/10 AWG (4-6 mm
2
): Hollingsworth XSS20836 OR
SS20832F or equivalent
Side-to-Side 0.5in (12.7mm)
Clearance
Distance
Top/Bottom 2.5in (63.5mm)
CK100 Kit Includes: C1, C2, C4, C7
(plus 2 ft./0.69 m. of stranded bus ribbon), C8
C3 Danaher Motion Kollmorgen #: A-93899-013
Vendor Info: Weidmuller BL3.5/13 Cat.No. 161574
C5 Danaher Motion Kollmorgen #: A-81014-004
Vendor Info: PCD ELFP04110
Connector Screw Torque 2.25 lb-in. (0.25 m.)
Mating
Connector
Hardware
24 V Logic (optional) Danaher Motion Kollmorgen #: A-81014-002
Vendor Info: PCD ELFP02210 (or equiv.)