Installation manual

Wiring 08/04 Danaher Motion Kollmorgen
22 M-SS-001-01 Rev. T SERVOSTAR S Installation
Product Model PA-LM PA08 PA14 PA28
Internal Fuses (amps)
(±15 V/+8 V)
1.5/3.5 1.5/3.5 3.5/7 3.5/7
Max. # of Drives Sourced
Refer to the SERVOSTAR Bus Module Sizing
Application Note.
115 VAC Turn-Off Level
(power-up)
70 70
115 VAC Turn-On Level
(normal)
50 50
230 VAC Turn-Off Level
(power-up)
70 125
230 VAC Turn-On Level
(normal)
50
112
Max. Surge Current (amps)
during power application
30 20 50
SoftStart
Max. Charge Time (sec)
0.75 0.25
Fault Contact Rating (±15%)
1 Amp max. at 115 VAC
Fault Contact
Closing Period (ms)
250 ms
Protection
Functions
Over Temperature trip
N/A
90° C (194° F)
Internal heat dissipation 7 45 70 130
Operating temp. (°C/°F)
5/41 to 45/113
Storage temp. (°C/°F)
0/32 to 70/158
Ambient humidity (%) 10 to 90
Atmosphere without corrosive gasses or dust
Altitude Derate 5% per 1000 ft. above 3300 ft.
Environment
Vibration (g) 0.5
Product Model PA50 PA75 PA85
Voltage (VAC
L-L
) Nominal ±10%
208-240
115 VAC 1φ and 3φ
N/A
230 VAC 1φ and 3φ
3
Line Frequency 47-63
kVA at 230 VAC
20 (3φ) 30 (3φ) 34 (3φ)
230 VAC Continuous Current
(amps)
50 (3φ) 75 (3φ) 85 (3φ)
230 VAC Peak Current (amps) for
2 sec /50 ms (normal operation)
3φ: 75/100 3φ: 115/150 3φ: 130/170
Main Input
Power
Line Fuses (FRN, LPN, or equiv.) 60 80 100
DC BUS Voltage (Nominal) 310 310 310 Main Output
Power
(Source)
kW at 230 VAC Line Input
15.5 (3φ) 23.3 (3φ) 26.4 (3φ)
Voltage (VAC) Nominal ±10%
208 to 240
Max. Current 1φ (amps)
1 1 1
Line Frequency 47-63 47-63 47-63
Logic Input
Power
Internal Fuse (amps) (internal) 2.5 2.5 2.5
+8 VDC Supply Voltage (VDC) +7.25 to +8.5
+8 VDC Supply Current (amps) 4.4 4.4 4.4
15 V Supply Voltage (±VDC) 14.25 to 16
15 V Supply Current (amps) 2.4 2.4 2.4
Internal Fuses (A) (±15 V/+8 V)
3.5/7 3.5/7 3.5/7
Logic Output
Power
(Source)
Max. # of Drives Sourced
Refer to the SERVOSTAR Bus Module Sizing
Application Note.