Installation manual

Danaher Motion Kollmorgen 08/04 Appendix C

SERVOSTAR S Installation M-SS-001-01 Rev. T 111

APPENDIX C

C.1 Resistive Regeneration

Shunt regeneration is required to dissipate energy that is pumped

back into the DC bus during load deceleration. The loads need to

be defined in terms of system inertia, maximum speed, and

deceleration time. In addition, the duty cycle must be known.

External Regen Resistor

Dimensions are in mm (inches)

Normally

Closed

Black

White

26 Ω