Product manual

Wiring the Drive 05/2008 Danaher Motion
48 S200-VTS Product Manual
J4-1
DINP COM
J4-2
DINP1 (ENABLE)
J4-3
DINP2 (INHIBIT+)
J4-4
DINP3 (INHIBIT-)
J4-5
MSINP1 (DIRECTION)
4.32 k
4.64 k
4.32 k
4.64 k
4.32 k
4.64 k
4.32 k
4.64 k
Input current is a function of the input voltage and listed in the following
table.
Input Voltage (±) Input Current (±)
4.0 volts 0.65 mA
5.0 volts 0.95 mA
12 volts 2.5 mA
24 volts 5.3 mA
30 volts 6.7 mA
The response time for DINP1, DINP2, and DINP3 is less than 1 ms.
DINP4 has a response time of less than 100 µs.
NOTE
For fastest response to an input, configure the drive to respond when the
input optoisolator is turned on (current starts flowing in the photo diode).
Response time is cut approximately in half.