Product manual
Danaher Motion 05/2008 Quick Start Guides
S200-VTS Product Manual 25
4.2.4.2 Start Communication Wizard
Open the Communication Wizard by selecting it from the toolbar (Utilities > Communication
Wizard) or clicking the shortcut icon.
Select SynqNet as the Communications Mode.
If you do not know which type of drive is connected, click the Test button. The returned
message will either say that there is no connection, confirm that you have an S200 connected,
or tell you that the connected node is NOT an S200 drive.
After you have confirmed your setup, click the OK button.
The installed S200 drive(s) will now be listed as "Online" and will list its configuration and status
options. If there are additional S200 nodes on the network, they are automatically discovered.
When using a network with multiple SynqNet nodes, use the SynqNet controller/node pulldown
bars to select a particular node on the network to display in the Online mode.