Product manual

Danaher Motion 05/2008 Appendix C – Danaher Motion Linear Motor Wiring
S200-VTS Product Manual 121
APPENDIX C – DANAHER MOTION LINEAR MOTOR WIRING
The S200 Drive with SynqNet option card runs linear motors with a linear feedback device
connected to J14. Feedback device possibilities include A quad B incremental encoder with
Hall, 1 Vp-p analog Sin-Cos encoder with Hall, and EnDat 2.1/2.2 with absolute linear position.
Be sure to set the following drive NV parameters to their proper values.
AuxFBType to match the feedback device type connected to J14
FBSrc to Option Card to use the J14 Aux Feedback to commutate the motor
AuxFBDivisor to the proper value to allow commutation with DPoles = 2