Product manual

Diagnostics and Troubleshooting 05/2008 Danaher Motion
110 S200-VTS Product Manual
Status
LED
Blink
Code
Fault Description Possible Cause
20 Option Card Fault
Check ExtFaults:
If ExtFaults is AuxFBFault, then the AuxFB device is in error.
Check the AuxFB faults: AuxFBEnDatFlt, AuxFBPTCFlt or
AuxFBSCDFlt.
Check to make sure that the drive is set up for the correct
feedback device and that the device is functioning correctly. If
ExtFaults is “No Extended Fault,” then this was a fault induced
by the controller, such as SynqLost.