Product manual

Danaher Motion 05/2008 Product Overview
S200-CNS Product Manual 9
3.2 INCREASED MACHINE THROUGHPUT & LONGER LIFE
• Servo system performance is synonymous with machine throughput. The S200 POSITION NODE
family takes servo performance to new heights.
• Industry-leading current loop bandwidth up to 5 kHz and velocity loop bandwidth up to 400 Hz
means machine throughput can be increased by as much as 2 to 3 times.
• Robust design including full fault protection, locking connectors and optical isolation promise
greater machine “up-time”.
• Smooth motion, a benefit of sinusoidal current control and high resolution (24 bit) feedback
minimizes harsh torque disturbances that can cut short the life of mechanical components.
• Both the AC and the DC input drives are equipped with separate control power input to speed
recovery from “E-Stop” conditions.
• CANopen Field Bus or DeviceNet communications
3.3 REDUCED ENGINEERING & SUPPORT TIME
• Simplified tuning, friendly Graphical User Interface and shared components with Stepper products.
• Windows-based Graphical User Interface models the tree format found in Explorer so learning is
quick and easy.
• Digital Oscilloscope emulator for easier setup.
• Easy to debug with full fault diagnostics reduce engineering support time.
• Field bus connectivity.
3.4 CE- / UL- CONFORMITY
• The S200 position node with CANopen meets all relevant standards:
• EMC Directive 89/336/EWG, standard used ENG61800-3
• Low Voltage Directive 73/23/EWG, standard used 50178
• UL / cUL 508C recognized