Product manual

Danaher Motion 05/2008 Detailed Wiring Information

S200-CNS Product Manual 51

10.8 WIRING DINP5 AND DINP10

As noted DINP5 and DINP10 are high speed opto-isolated input devices that do not have a

connection to a common rail. They are designed for 5 volt operation and the polarity of the power

supply used is critical for functionality. Not having a common rail connection the inputs can be wired

for sourcing or sinking according to the need of the application.

For systems desiring to use input voltages exceeding the 5V rating for DINP5 and DINP10 an

external current limiting resistor must be used. The resistor should be in series with the input line.

The following table indicates the recommended resistor values.

Supply Voltage Resistor Value

3-6V No Resistor

12V 470 Ohm ¼ Watt

24V 1200 Ohm, ½ Watt

DINP5

(DINP10)

S200 Position Node

Internal Equiv Circuits

Speed Opto

Isolator

Field Wiring

Customer’s Power Supply

5Vdc

J4-10

(J12-10)

J4-11

(J12-11)