Product manual

Danaher Motion 05/2008 Specifications
S200-CNS Product Manual 11
4 SPECIFICATIONS
NOTE
Unless otherwise specified, the specifications are worst
case limits and apply over the specified operating ambient
temperature and over the specified operating line voltage.
4.1 DRIVE FAMILY POWER
AC Input DC Input
Drive Model Number S20260 S20360 S20660 S212660 S20330 S20630
Peak Output Current (A
RMS
)
1
(0 to 40°C) Ambient (A
RMS
) 4.5 9 18 30 9 18
Minimum Peak Current Time
(Starting from 0 amps) seconds 3 3 3 3 3 3
Continuous Output Current (A
RMS
)
2
0 to 30°C ambient (A
RMS
) 2.3 4.5 9 15 4.5 7.5
40° C ambient (A
RMS
) 1.5 3 6 12 3 6
50° C ambient (A
RMS
) 1 2 4 8 2 4
Peak Output Power
240 VAC (VA), 3 phase 1500 3000 6000 10000 - -
120 VAC (VA), 1 phase 750 1500 2400 - - -
75 VDC (VA) - - - - 750 1500
Drive Continuous Output Power
240 VAC, 3 Phase (watts) 600 1100 2000 4000 - -
240 VAC, 1 Phase (watts) 500 900 1500 2500 - -
120 VAC, 1 Phase (watts) 250 450 - - - -
75 VDC (watts) - - - - 250 500
Continuous Motor Shaft Power at 3000 RPM (Nominal Bus – 10%)
0 to 30°C ambient (watts) 3-ph 300 750 1500 2500 - -
0 to 30°C ambient (watts) 1-ph 300 750 1300 2200 180 315
40° C ambient (watts) 200 500 1000 2000 125 250
RMS Line Current at Continuous Output Power
240 VAC 3 Phase (A
RMS
) 2.7 5 9 16 - -
240 VAC 1 Phase (A
RMS
) 3.4 6.5
12
(Note 3)
18 (Note 3) - -
120 VAC 1 Phase (A
RMS
) 3.4 6.5 12 (Note 3) - - -
+BUS Current – 75 VDC at Continuous Output Power
3
Average (A
DC
) - - - - 3 6.7
Instantaneous Peak (A
PEAK
) - - - - 12.7 25.5
Power Dissipation at 40°C
P
CONT
(watts)
17 29 60 110 8 12