Installation manual

68
6 SYSTEM TOOLS
6.1 STATUS SCREEN
The Status
screen can be
helpful to
understand
system
operation. Drive
Status should
read ‘OK’. If not
then a
meaningful fault
code will be
shown.
General
information
about drive size
and firmware
version is
shown.
Energizing a
drive input causes the green ‘Virtual LED’ to illuminate. If an output is on then it’s
Virtual LED will illuminate.
Position and velocity information can be monitored.
If the system
is safe to
accept motion
then the
motor can be
jogged from
the status
screen.
Drive OK
Indicator LED
Jog
Clockwise
Jog Counter-
Clockwise