Installation manual
41
1 1"#
F' $' 95.
F'! 8UJ 95-
F' &5 9
F' 8U= 1&
F' $A
J11-1 V-
Return on power supply to CAN physical layer
J11-2 CAN_L
Low level CAN transmission signal
J11-3 Shield
Shield connection point. Tied to chassis ground through 1MΩ resistor in
parallel with 0.01 µF capacitor
J11-4 CAN_H
High level CAN transmission signal
J11-5 V+
Power supply input for CAN physical layer. Rated 11-26 volts dc. Typically
draws 30mA