Installation manual
6
<:11#;#8 "
<4#(0
.
1<5 !
1<5
1
Peak Output Current listed is for sine mode. In six-step mode, the peak output currents are scaled to give the
same output torque as in sine mode with a pure sinusoidal Back EMF motor.
To convert A
RMS
to A(0-pk), multiply A
RMS
* 1.414.
2
For Operation above Above 40
o
C ambient: Derate linearly to 67% at 50
o
C .
At higher ambient temperatures (above 30
o
C) the S20360 drive needs to be mounted on a thermally conductive
surface to limit the heatsink temperature to less than 75
o
C.
3
Single phase operation of the S20660 requires derating of continuous output power to avoid excessive AC line
front-end currents.
4
See Appendix – Cables for voltage loss vs cable length.