User Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Theory of the Speech and Music Systems
- Chapter 3: Installation
- Chapter 4: Connecting to a Computer
- Chapter 5: Dugan Control Panel Software
- Chapter 6: Pre-fader Insert
- Chapter 7: Dugan Music System and Gain Limiting
- Chapter 8: Front Panel
- Chapter 9: Updates
Dugan Model M User Guide
28
Channel Pane
The Channel Pane contains the controls and indicators for each channel. Channels
are either in bypass or one of three operating modes: man, auto,ormute. The active
channel mode illuminates. All transitions are made with a smooth, rapid fade. Select a
channel mode by pressing the individual mode buttons or the Master PRESET button.
Figure 5-3 shows a typical system: channels 1–4 in auto with ambient noise, and
channels 5–8 in mute.
Figure 5-3 Channel Pane
Level Indicator
Each channel has a level LED that lights green when the audio level is adequate for
automatic mixing. It should remain green when no one is talking.
• If the level indicator blinks, raise the console’s channel input gain.
• If the level LED lights red, lower the console’s channel input gain.