User Guide

Dugan Model K Control Surface User Guide
23
Brightness Knob and Master Display
The Master display is located above the right arrow. By default it shows the name and
model of the selected Dugan controller.
• Turn the bright knob to set the overall brightness.
• Press the bright knob repeatedly to access the parameters in the table below.
• From any parameter, press the bright knob twice quickly to return to the default
display.
Parameter Value Color
Brightness (default)
5–100%
Selected Dugan
Unit Information
Tur n the knob to di s p l ay :
Dugan Model
Serial Number
MAC Address
Firmware Version
Additional items (depends on model)
Factory Reset Press the right arrow button to reset the currently displayed Dugan unit.
Online Units
Tur n t h e knob to displ ay t h e n a m e s o f t h e cur r e n t l y c o nnected Dug a n u n i t s .
The second line of the displa y shows whether each unit is reachable or not.
If a unit is not reachable, use the Dugan Utility to set a compatible IP
Address.
IP Address of this
Model K
Hold down the knob to edit the IP Address.
See Establishing Network Connections on page 10.
Netmask of this
Model K
Hold down the knob to edit the Netmask.
See Establishing Network Connections on page 10.
System Focus
Press and hold the knob until the parameter value blinks.
Turn the knob to select System All or System 1-16.
Press and hold the knob until the Model K reboots.