User Guide

Dugan Model K Control Surface User Guide

Master Section

The Master Section contains a knob and three buttons for each group (a, b, c).

Group Master Buttons

Override

Pressing the Master over button puts the group into override mode and has the follow-

ing effect on individual channels:

• Channel override LED active: puts the channel in man mode with full gain (no au-

tomixing);

- OR -

• Channel override LED inactive: mutes the channel.

The over button winks while override mode is active. Press it again to deactivate over-

ride mode.

NOTE: To assign channels to the override group, see Override on page 18.

Preset

Clicking the Master pre button sets the channel modes (man, auto, mute) to those

shown on each channel’s preset LEDs.

The preset indicators should mirror your normal working combination of input

modes. The normal condition can then be restored by pressing the Master pre button.

On power-up, channels are set to the preset condition.

NOTE: To set the channel preset modes, see Preset on page 17.

Mute

Press the mute button to toggle the muting of a group. The mute button winks when

the group is muted.