User Guide

Dugan Model K Control Surface User Guide
19
Group Assignment
Groups are separate automatic mixers. Every channel is in a group (a, b, c); group a
is the default. Channels can be assigned to groups using the channel knob (described
above), or the following shortcut method.
Shortcut
1. In the Master section, press and hold the group’s knob.
All knobs light in the colors for their assigned groups.
2. For each channel you wish to include in this group, press the channel’s knob.
While holding down the group’s knob, you may scroll to other blocks of channels.
3. Release the group’s knob.
Alternate Method
1. Press the channel knob until Ch. Group appears.
2. Turn the knob to set the channel’s group.
3. Press the knob twice quickly to return to the default display.
Scene Section
The Scene Section lets you save and recall scenes. Scenes include all parameters in a
Dugan unit except I/O, network settings, and the name of the unit. Scenes are saved
in each Dugan unit.
When the Global checkbox is selected in the Scenes Panel in the Dugan Control Pan-
el, that Scene is stored under the same name on all connected units; each unit stores
its own settings. When a Scene is recalled on a given unit, any Scene name that
matches in other units on the network is also recalled.
NOTE: The Model K operates globally by default, so it stores and recalls Scenes for all connected
units. See System Focus on page 23 to restrict operation to a selected unit.