User Guide

Dugan Model K Control Surface User Guide

Method to Use During Show

1. Press the channel knob repeatedly until Ch. Preset appears in its display.

2. Turn the knob until the desired mode (man, auto, mute) appears in its display.

An LED lights next to the button for that mode.

3. Press the knob twice quickly to return to the default display.

NOTE: See page 21 for instructions on how to use the preset function.

Override

To mute all mics except one for the host or chairperson, use the override function.

However, any number of mics can be included in the override group. There are two

methods to assign channels to an override group. The shortcut method executes the

override function when the over button is first pressed so we do not recommend us-

ing this method during a show.

Shortcut to Use During Setup

1. In the Master section, press and hold the group’s over button.

2. For each channel you wish to include in the override group, press the man button

to toggle the state.

The LED next to man lights indicating that the channel is included.

While holding down the over button, you may scroll to other blocks of channels.

3. Release the over button.

Method to Use During Show

1. Press the channel’s knob repeatedly until Ch. Override appears in the display.

2. Turn the knob until Enabled appears in the display.

The yellow LED next to man lights indicating that the channel is included.

3. Press the knob twice quickly to return to the default display.

NOTE: See page 21 for instructions on how to use the override function.