User Guide

Dugan Model K Control Surface User Guide
14
Channel Block Selection
The left and right arrow buttons (see figure below) select the previous or next block
of eight channels in the system. This is just like clicking in the Top Pane of the Dugan
Control Panel to select a block. For these actions to mirror each other, pair the Model
K with that instance of the Dugan Control Panel (see Pairing the Model K to Dugan
Control Panel Software on page 11).
Figure 3-1 Model K Control Surface showing arrow buttons
The name of the device you currently control appears in the Model K’s Master Dis-
play above the right arrow button. When block selection takes you to a new device,
its name appears. The channel names appear in the Model K’s Channel Displays.
Channel Section
Each channel in the Channel Section includes three buttons, four LEDs, a display,
and a knob. The display defaults to showing the channel name with a bar graph of
the automix gain below it. Channel names can be edited in the Dugan Control Panel
Software.
Channel Mode Buttons
These three buttons control the Dugan automixing mode for each channel.
• man: Manual (soft bypass)
• auto: Automatic mixing
• mute: Mute
In auto mode, the auto button lights with variable intensity to indicate the automix
gain.
Channel Section Scene Section Master Section
Master Display
Left and Right Arrow Buttons to Scroll Blocks