User Guide
Dugan Model K Control Surface User Guide
11
To set the Model K’s IP address to the factory default:
•Pressandholddowntheleftandrightarrowbuttonstogether.
Release the buttons when lights blink. The unit has been reset to factory defaults
including the IP address: 192.168.1.xx, where xx is the last two digits of the unit’s
serial number. If the serial number ends with 00, 100 will be used.
To manually set the Model K’s IP address on the Model K itself:
1. Press the bright knob multiple times until IP Address appears in the Master Display.
2. Press and hold down the bright knob until the IP address blinks.
3. When you release the bright knob, the first group of digits in the IP address will
blink, indicating they can be edited.
4. Turn the knob to enter the desired number.
5. Press the bright knob again to edit the next group of digits.
6. Repeat until the IP address is what you want.
The display wraps around after reaching the last group.
7. Press and hold the bright knob to set the IP address.
The Model K reboots with the new IP address.
Pairing the Model K to Dugan Control Panel Software
Pairing establishes bidirectional control between the Model K and an instance of the
Dugan Control Panel software. When paired, selecting a block in the Top Pane of the
software selects the same block on the Model K, and vice versa.
To pair the Model K:
1. Launch the Dugan Control Panel software.
2. Click the Model K tab at the right side of the window.
If there is no Model K tab, you must update your Dugan Control Panel software (see
the Updates chapter in your Dugan automatic mixing controller user guide).
3. To rename your Model K, double-click in the name field, type a new name, and
press the Return key to set.
4. Select the checkbox next to the name of your Model K.
This control surface is now paired with this instance of the Dugan Control Panel
software. Additional Model Ks can operate on the same network, and can be
paired with instances of the Dugan Control Panel on other computers.
5. Click the CLOSE tab.
NOTE: Up to five control panels (surfaces and/or instances of Dugan Control Panel software) can
be used simultaneously.