User Guide

Dugan Model K Control Surface User Guide
10
Power Supply
Units include a multi-voltage power supply. In an emergency, the Model K can ac-
cept power supplies in the range 12–24 VDC, minimum 1 A.
Hardware Connections
The Model K provides the following on the rear panel:
• Locking power input
• Power switch
• Ethernet switch with four external ports
Figure 2-3 Model K rear panel network and power connectors
Make the following hardware connections:
1. Attach the provided power cable to the locking power input connector.
2. Attach an Ethernet cable from any Model K Ethernet port to a Local Area Network
that includes your Dugan automatic mixing controller(s).
Configuration
Establishing Network Connections
To establish network connections to your Model K, use the Dugan Utility in the same
way as you did to connect your Dugan automatic mixing controller(s):
• If the network has a router, select Use DHCP and click Send New Params to Unit.
• If there is no router, deselect Use DHCP, edit the IP address field, then click Send
New Params to Unit.