User Guide

Dugan Model N User Guide Front Panel
63
Scene Memory Screen
This screen lets you recall, save, and create a new scene. Scenes include all Model N
parameters except the Dante and network configurations, and the name of the unit.
The last Scene recalled shows at the top of the screen. A * at the end of the Active
Scene name indicates it has been edited and does not match the stored Scene.
Figure 8-12 Scene Memory screen
To recall a Scene:
1. Turn the knob to scroll through Scenes, which display in alphanumeric order.
2. Press the knob to recall that Scene.
To save the current Scene:
1. Navigate to the Save button.
2. Press ENTER to update the Scene with the current state of the unit.
The Save button is inactive if the Scene has not been edited.
To create a new Scene:
1. Navigate to the New button.
2. Press ENTER to create a new Scene with the current state of the unit.
An automatically generated number is assigned.
To restore all parameters in the unit except the Dante and network configurations,
and the unit name, recall the Factory Defaults Scene.
NOTE: After editing the Factory Defaults Scene, the Save button will be inactive. Click New
to save the current state of the unit.
See Chapter 5: Dugan Control Panel Software to learn how to name and otherwise
manage Scenes.