User Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Theory of the Speech and Music Systems
- Chapter 3: Installation
- Chapter 4: Connecting to a Computer
- Chapter 5: Dugan Control Panel Software
- Chapter 6: Pre-fader Insert
- Chapter 7: Dugan Music System and Gain Limiting
- Chapter 8: Front Panel
- Chapter 9: Updates
Dugan Model N User Guide
62
Control Network Configuration Screen
This screen lets you configure the control network parameters for this device. Con-
nect your Dugan Control Panels to this port.
Figure 8-11 Control Network Configuration screen
We recommend selecting DHCP which will supply valid IP Address, Netmask, and
Gateway values automatically. Those users familiar with network settings can enter
them manually. Navigate to the desired group field and turn the knob to change the
value.
When you click MENU to exit, if you made any changes a dialog appears. Click CANCEL
to discard changes or APPLY to save them.
NOTE: The Dante system generates the Dante network addresses automatically, and we rec-
ommend leaving them alone. These network addresses can be found in the Dante
Controller software.
See Chapter 4: Connecting to a Computer to troubleshoot network settings.