User Guide

Dugan Model N User Guide Dugan Control Panel Software
39
The Master indicators are shown in Figure 5-11:
• online: Lights when a unit is connected to the Dugan Control Panel
• Dante-ADAT, NORM-SLAVE: Show their rear panel switch settings
• Dante: Indicates a valid Dante source
• 48k lock/96k lock: Indicates a valid Word Clock source
The Master controls are also shown in Figure 5-11 and are discussed below. A set of
OVERRIDE, PRESET, and MUTE buttons appears for each active group.
ADAT
Clicking this button toggles the ADAT I/O mode between eight and 16 channels. In
16-channel mode, linking is not possible.
Reset
Before making a new setup, we recommend clicking reset to set all operating param-
eters to default values. Reset does not include setup parameters such as network and
Dante configuration or the unit’s name.
Meters
The meters have three display modes. The default mode is auto mix gain, which is the
most useful display during normal operation. The input and output meters are only
used when setting or checking levels.
Table 5-2 Meter modes
Click on the Master meters button to cycle through the three meter display modes.
Clock Source
The clock source button displays the currently assigned source which determines the
sample rate. If Word Clock and any other clock source is present, the Dugan auto-
matically selects Word Clock.
Meter Displays Meter Color
auto mix gain
action of the Dugan Speech System green
input
input level yellow
output
output level blue