User Guide

Dugan Model N User Guide Connecting to a Computer
23
4. Click on the first unit in the list so it is highlighted.
The Network Parameters section displays information about that unit.
If Unit Reachable is YES, you are ready to use the Dugan Control Panel with
that unit. If you have additional Dugan units to connect, select the next
unit in the list and repeat this step. If you are finished with installation,
proceed to Chapter 4: Dugan Control Panel.
If Unit Reachable is NO, proceed to the next step.
5. Select the Use DHCP parameter.
6. Click Send New Params to Unit.
7. Click Refresh List.
8. Highlight the unit in the list pane again.
If Unit Reachable is YES, this unit is ready to use with the Dugan Control
Panel. If you have additional Dugan units to connect, select the next unit
in the list and repeat Step 4. If you are finished with installation, proceed
to Chapter 4: Dugan Control Panel.
If Unit Reachable is NO, proceed to the next step.
9. De-select the Use DHCP parameter.
10. Match the first three groups of the IP Address with the computer, and as-
sign your own number to the last group.
This number must not have been assigned to another device in this net-
work. You may need to consult with the administrator of the network to
determine this.
11. Click Send New Params to Unit.
12. Click Refresh List.
13. Highlight the unit in the list pane again.
If Unit Reachable is YES, this unit is ready to use with the Dugan Control
Panel. If you have additional Dugan units to connect, select the next unit
in the list and repeat Step 4. If you are finished with installation, proceed
to Chapter 4: Dugan Control Panel.