User Guide

Dugan Model N User Guide
20
Word Clock
By default, Word Clock is derived from the active Dante or ADAT input. However, if
a Word Clock signal is sent to
WORD CLK IN, the Model N will use that as its Word
Clock source. In all cases, the Word Clock output is sent to
WORD CLK OUT.
Power
A power connector accepts a locking power cable. In an emergency, the Model N
can accept power supplies within the range 12–24 VDC, 2 A (minimum), center pin
positive.
Unprocessed Outputs
Unprocessed splits of the input signals are always present on the outputs of the un-
used I/O connectors. These can be sent to a multitrack recorder. The position of the
DANTE-ADAT switch determines the I/O:
• DANTE: Dante inputs 1–8 are mirrored to ADAT outputs 1–8.
In 16-channel ADAT mode, the first 16 channels are mirrored.
• ADAT: ADAT inputs 1–8 are mirrored to Dante outputs 1–8.
In 16-channel ADAT mode, the first 16 channels are mirrored.