User Guide

Dugan Model E-2A User Guide Front Panel
70
Mix Bus Matrix
The matrix lets you route signals to up to six mix buses, with gain control at each
crosspoint. In addition to automixed channels, you may patch any input channel
directly to buses.
Mix Bus Matrix Masters Screen
This screen lets you assign which outputs to use for the MIX BUS MASTERS. You can
use up to six mix buses.
Figure 9-10 Mix Bus Masters screen
To assign destinations to the mix buses:
1. Use the arrow keys to navigate to each mix bus output title.
2. Turn the knob to select the desired output.
Select MIX to use a mix bus internally as a Music System Threshold Input.
This screen includes the same controls found in the mix bus masters screen in the
Dugan Control Panel (see page 49).
To make these settings from this screen:
1. Use the arrow keys to navigate to the desired control.
The name and value appears on the right side of the screen.
2. Press ENTER to toggle a button.
3. Turn the knob to adjust a master gain fader.
4. To set up the matrix crosspoints, select MATRIX from the top-right (see next section).