User Guide

Dugan Model E-2A User Guide Front Panel

Sync Source

The Sync source is automatically set to ADAT if the channel selection includes ADAT

channels, otherwise it will be set to 48k (internal clock).

Network Setup Screen

This screen lets you configure the port used to connect Dugan Control Panel(s) to this

device.

Figure 9-9 Network Setup screen

•If using a router, you can select DHCP to automatically supply valid IP Address, Net-

mask, and Gateway values.

- OR -

•Without a router, you can set the IP address settings manually. Navigate to each

three-digit group and turn the knob to change the value.

To avoid sending spurious signals to the network, changes to this screen do not hap-

pen until you exit. Click MENU and a dialog to APPLY or CANCEL appears if you made

any changes.

See Chapter 5: Connecting to a Computer to troubleshoot network settings.