User Guide

Dugan Model E-2A User Guide Front Panel
68
Channels Setup Screen
This screen lets you choose the desired number of Analog and ADAT Channels and the
Sync source to use with this device.
Figure 9-8 Channels Setup screen
Back Panel Switches
The ANA ↔ DIGI, NORM ↔ SLAVE, and +4 ↔ -10 switches display the modes set by their
respective back panel switches (see Model E-2A Modes on page 23) and cannot be
changed from this screen.
Automix Channels
In ANA mode:
1. Navigate to Analog Channels.
2. Turn the knob to select 8, 9...12 channels.
3. By turning the knob past 12, you can add 8 or 16 ADAT Channels.
In DIGI mode:
1. Navigate to ADAT Channels.
2. Turn the knob to select 8 or 16 channels.
To increase the number of mirrored channels, activate Disable Linking. Note that using
16 ADAT channels automatically disables linking.
Reset to Default
Activating this button sets the Automix Channels to 12 analog or 8 ADAT, depending
on the mode.