User Guide

Dugan Model E-3A User Guide Front Panel
72
Scene Memory Screen
This screen lets you recall, save, and create a new scene. Scenes include all Model E-3A
parameters except the network setup and the name of the unit. The last scene recalled
shows at the top of the screen. A * at the end of the Active Scene name indicates it has
been edited and does not match the stored scene.
Figure 9-13 Scene Memory screen
To recall a scene:
1. Navigate to the scene name field (to the right of Recall).
In Figure 9-13, the scene name is Factory Defaults.
2. Turn the knob to scroll through scenes.
They display in alphanumeric order.
3. Press the knob to recall that scene.
To save the current scene:
1. Navigate to the Save button.
2. Press ENTER.
The scene updates with the current state of the unit.
The Save button is inactive if the scene has not been edited.
To create a new scene:
1. Navigate to the New button.
2. Press ENTER.
A new scene is created with the current state of the unit. An automatically gener-
ated number is assigned. Scene names can be edited on the Control Panel for Java.