User Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Theory of the Speech and Music Systems
- Chapter 3: Quickstart
- Chapter 4: Installation
- Chapter 5: Connecting to a Computer
- Chapter 6: Dugan Control Panel Software
- Chapter 7: Pre-fader Insert
- Chapter 8: Dugan Music System and Gain Limiting
- Chapter 9: Front Panel
- Chapter 10: Updates
- Appendix A: Connector Pinouts
- Appendix B: Specifications
Dugan Model E-3A User Guide Theory of the Speech and Music Systems
12
Insert Patching
Figure 2-2 Post-fader insert patching
The Dugan Speech System is best patched post-EQ, post-fader, pre-compressor:
• Post-EQ: Equalization can be applied to different mic types so they sound more alike,
which benefits both the sound quality and the automixing process.
• Post-fader: This allows muting channels on the console by pulling down the fader
or activating the mute button. Patching the Dugan pre-fader leaves the mic in the
automix even when the fader is down or the console channel is muted.
Most analog consoles only have pre-fader inserts. You can use Dugan automixing
with these consoles but you must be careful to mute channels by muting on the
Dugan, not the console.
• Pre-compressor: The Dugan Speech System works on the level differences between
channels. Compression reduces level differences between channels, making auto-
mixing less effective. It is OK to patch post-compressor if only occasional peak
limiting occurs. However, if compression is active during normal speech, better
results will be obtained by patching the Dugan pre-compressor.
EQ
MICROPHONE
INPUT
INSERT
POINT
INSERT
POINT
MIX BUS
CONSOLE
INSERT
POINT
DUGAN CONTROLLER
DCA
WEIGHT
FADER
ALGORITHM










