User Guide

Dugan Models E-1 and E-1A User Guide Installation and Configuration
25
Manually Add Unit
If the Dugan unit does not appear in the Dugan Utility list pane, you can manually
add the unit:
1. Power down the Model E-1A.
2. Hold down Channel 1’s mute button and power up the unit.
This performs a network reset.
3. Click Manually Add Unit.
4. Enter the default IP address: 192.168.1.xx
xx = last two digits of serial number, unless they are 00, in which case enter 100.
5. Click OK to exit the dialog.
6. Click Refresh List.
If the list pane is still blank, consult the duganusers Yahoo group (http://
tech.groups.yahoo.com/group/duganusers) or contact Dan.