User guide

Dugan-MY16 User Guide The Dugan Control Panel
21
Man
This sends the audio through without any gain alteration. Use this mode when some-
one sings into this mic.
Auto
This engages the Dugan Speech System. Use this mode for dialogue.
Mute
This mode mutes the channel.
Preset
These buttons select the channel mode (man, auto, mute) when the master PRESET but-
ton is pressed. The preset programmed for each channel is indicated by a lit preset
button.
Override
This button programs the channel to change modes to either man or mute when the
master OVERRIDE button is active.
•If the channel override is active, activating the master OVERRIDE button changes
the channel mode to man.
•If the channel override is not active, activating the master OVERRIDE button chang-
es the channel mode to mute.
•When the master OVERRIDE button is deactivated, the channel returns to its pre-
vious mode.
Multiple channels can have their override buttons active at the same time.
Override can be used to help the leader of a panel discussion take control of the system.
To program this:
1. Activate the leader’s channel override button.
2. Deactivate all other channels’ override buttons.
3. Activate the Master OVERRIDE button when needed.
Channel Name
The channels can be named by entering text in the field under the channel number.
Channel names are remembered on the card. They are erased by pressing the
Reset
button on either the rear panel or Dugan Control Panel.