User guide

Dugan-MY16 User Guide
14
Choose an Operating Mode
The operating mode determines sample rate, linking, and channel count. Set the Ya-
maha mixer’s sample rate before setting the operating mode. See your Yamaha mixer
user guide to learn how to do this.
Choose one of the three operating modes:
Standard
Sixteen Dugan mixing channels at 44.1 or 48 kHz
ADAT I/O connectors can link multiple Dugan units
High-rate
Eight Dugan mixing channels at 88.2 or 96 kHz
ADAT I/O connectors can link multiple Dugan units
Shared
Eight Dugan mixing channels at 44.1 or 48 kHz
The ADAT I/O connectors serve as a general-purpose interface that is available
for patching on channels 9–16 of the Dugan-MY16’s slot. These channels are
unrelated to Dugan mixing and can be used as additional Yamaha mixer I/O.
To use channels 9–16 (as with any digital input), an appropriate synchroniza-
tion source must be selected. See your Yamaha mixer’s user guide for details.
To configure and install the Dugan-MY16 card:
1. Set the 48 kHz-96 kHz switch according the table below.
Mode
Mixer Sample
Rate
Sample Rate
Switch
LINK-AUDIO
Switch
Standard
44.1 kHz 48 kHz LINK
48 kHz 48 kHz LINK
High Rate
88.2 kHz 96 kHz LINK
96 kHz 96 kHz LINK
Shared
44.1 kHz 48 kHz AUDIO
48 kHz 48 kHz AUDIO