User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Dongle Configuration
TetraFlex® 7.5 Manual 2-40
2.3.1.3 Dongle settings and combinations
APPLICATIONS
BSC
A detail for each application has
been defined in the system
planner. Be aware that the
selections here may result in
additional dongle hardware to be
invoiced.
Voice GW
Packet data GW
Application Conn
Log Server
Log Client
API
DAMM Dispatcher
Network Management
DONGLE
BSC node (BSC 4xx)
1st BSC
Redundant BSC node (BSC 4xx)
2nd BSC
BSC node dongle (PC)
API Client Dongle
Log Server dongle
Log client dongle
Network management dongle
Network Management may be
invoked from any PC with a valid
DAMM dongle.
Select only if separate NM dongle
is desired
OBS: Max. 1 selection per
column except for BSC.
Max 4 applications per dongle.
(BSC = 1 application)
Log server statistics only functionality is available if Log Server is installed and a
DAMM dongle is present. Needs no dongle reference to server or client
Dispatcher only refers to DAMM dispatcher, not customer programmed
Figure 2-1: Dongle Combinations
2.3.1.4 Dongle Update
The dongle can be reprogrammed by means of an update file. The file can be sent by e-
mail from DAMM to the Partner, and downloaded locally to the system by means of the
Remote Desktop icon in the node and thereafter executed. The update file is linked to the
Dongle hardware serial number and can only be executed on the node where the specific
dongle serial number is installed. The update file (.exe file) can be placed on any driver on
the target e.g. C:\ or the desktop and executed from there.
The special encryption key cannot be updated. The dongle must be returned to DAMM for
change/update of encryption key, but other parameters may be upgraded remotely.