User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - SB421 Configuration
TetraFlex® 7.5 Manual 2-58
Figure 2-8: BIOS main selection
o Select Secondary Master
Figure 2-9: USER type change
o Select “TYPE” and change type to “Auto” by tapping the <Space> key
o Press <F10> to save the setting and exit the BIOS setup
2.5.1.4 IP address set-up
For the TetraFlex
®
system all IP addresses except for multi node networking is preset upon
delivery. The only setup necessary is the IP addresses for the WAN used for application GW,
network management, remote desktop connection, log server client, and dispatcher client.
These IP addresses are entirely user dependent and they are setup using the WAN Ethernet
board configuration in Windows operation system.