Specification Sheet

CONCRETE LOOK
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com. ©2019 Daltile (6/19)
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
Archer Mosaic
Mesh-mounted
(12-15/16" x 12-15/16")
(32.87cm x 32.87cm)
3/8" 8.19 7
3D Cube
Mesh-mounted
(11-1/2" x 11-1/2")
(29.21 cm x 29.21cm)
3/8" 6.20 10
INSTALLATION
Grout Joint Recommendation Shade Variation
Mosaic: 1/8"
Medium (V2)
UC10UC16,
UC18UC19
High (V3)
UM20UM23
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Special care should be taken when grouting with dark pigmented
colors. A grout release is recommended to prevent finely powdered
pigments from lodging in the pores of the surface. Use of a latex
modified thin-set is recommended for installation.
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42 *
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more
information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications in freezing and non-freezing climates, when proper
installation methods are followed.
* Mosaic tile suitable only when a linear drain system is used and proper installation
methods are followed
PERFORMANCE CHARACTERISTICS
ASTM# Result
Water Absorption C373 <0.5%
Breaking Strength C648 > 275 lbs
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 N/A
For additional information on test results, visit us at:
daltile.com/information/TestResults.
PRE-CONSUMER
RECYCLED MATERIALS
MADE IN THE U.S.A.
REVEAL IMAGING
®
All or select items within this series meet the requirements for these
qualifications. For more information, visit daltile.com.
FLOOR | WALL
UNIFORM MOSAICS
™
COLORBODY
™
PORCELAIN