Specification Sheet

ManualsBrandsDaltile ManualsFlooringSanford Desert Sand Matte 6 in. x 12 in. Glazed Ceramic Cove Base Trim Tile

SIZES

Thickness

Sq. Ft.

per Carton

Pieces Per

Carton

12 x 36

Field Tile

(11-5/8" x 35-3/16")

(29.56 cm x 89.32 cm)

7/16" 11.40 4

8 x 36

Field Tile

(7-5/8" x 35-3/16")

(19.60 cm x 89.32 cm)

7/16" 11.40 6

12 x 24

Field Tile

(11-5/8" x 23-3/8")

(29.56 cm x 59.44 cm)

3/8" 15.28 8

6 x 24

Field Tile

(5-5/8" x 23-3/8")

(14.62 cm x 59.44 cm)

3/8" 10.67 11

All sizes available in both unpolished and polished surfaces.

INSTALLATION

Grout Joint Recommendation Shade Variation

1/8" (3/16" when installed in a staggered

brick-joint pattern; overlap should not

exceed 33%)

Random (V4)

TEST RESULTS

ASTM# Result

Water Absorption C373 < 0.5%

Breaking Strength C648 > 400 lbs.

Scratch Hardness MOHS

8.0 (Unpolished)

5.0 (Polished)

Chemical Resistance C650 Resistant

NOTES

Special consideration needs to be given when installing tiles greater

than 15 inches. Please refer to daltile.com/LargeTiles for more

information.

Strong random shading enhances the natural beauty of this product.

To achieve optimal results, tile should be selected from multiple

cartons and shading arrangement planned prior to installation.

Special care should be taken when grouting with dark pigmented

colors. A grout release is recommended to prevent finely powdered

pigments from lodging in the pores of the surface. Use of a latex

modified thin-set is recommended for installation.

Since there are variations in all fired products, tile and trim supplied

for your particular installation may not match these samples. Final

color selection should be made from actual tiles and trim and not

from tile samples or color reproductions. Manufactured in accordance

with ANSI A137.1 standards.

Water, oil, grease, etc. create slippery conditions. Floor applications

with exposure to these conditions require extra caution in product

selection. Not for use on ramps.

For additional information refer to “Factors to Consider” at

daltile.com/Factors.

TRIM

Type Number Size

Pieces Per

Carton

Bullnose

(Polished & Unpolished)

S-43C9 3 x 12 30

Cove Base P-36C9T 6 x 12 22

Cove Base Outcorner PC-36C9T 1 x 6 15

Bullnose, cove base and cove base corner trim are intended to

coordinate with floor field tile in the standard 90-degree installation

position.

Cove base and cove base outcorner trim are clay body ceramic

suitable for non-freezing climates only.

FLOOR

RIVER MARBLE

™

COLORBODY

™

PORCELAIN

7834 C. F. Hawn Freeway,

Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of

Daltile

products and information,

visit our website at daltile.com.

SCAN QR CODE

FOR PRODUCT

INFORMATION

Get a QR Code

reader at:

GET.DALTILE.COM

Generated by BeQRious.com

DESIGNED TO HELP EARN LEED™

CREDITS. For more detailed information,

visit daltilegreenworks.com.

FLOOR APPLICATIONS

Target

DCOF wet

Suitable

Dry & Level – Interior N/A

Wet & Level – Interior ≥ 0.42 *

Exterior Applications,

Pool Decking & Other Wet Areas

with Minimal Footwear

≥ 0.60

Ramps & Inclines ≥ 0.65

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces

expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For

more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

OTHER APPLICATIONS

Suitable

Walls/Backsplashes

Countertops

Pool Linings

APPLICATION NOTES:

* Unpolished surface only

Polished surface is suitable only for dry and level floor applications.

Suitable for exterior applications in freezing and non-freezing climates when proper

installation methods are followed.