Specification Sheet

SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
8 x 8
Floor Tile
(7-7/8" x 7-7/8")
(20.00 cm x 20.00 cm)
3/8" 10.32 24
8 x 8 Decorative
Floor Tile
(7-7/8" x 7-7/8")
(20.00 cm x 20.00 cm)
3/8" N/A 24
INSTALLATION
Grout Joint Recommendation Shade Variation
3/16"
Medium (V2)
PERFORMANCE CHARACTERISTICS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 275 lbs
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 N/A
For additional information on test results, visit us at:
daltile.com/information/TestResults.
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Special care should be taken when grouting with dark pigmented
colors. A grout release is recommended to prevent finely powdered
pigments from lodging in the pores of the surface. Use of a latex
modified thin-set is recommended for installation.
Use of a latex modified thin-set is recommended for installation.
For more information, visit daltile.com.
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2018 Daltile (2/18)
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
For more information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications in freezing and non-freezing climates, when proper
installation methods are followed.
FLOOR
QUARTETTO
™
GLAZED PORCELAIN with REVEAL IMAGING
®