Specification Sheet

NOTES
Natural stone products inherently lack uniformity and are subject to variation in aesthetics (color, shade, finish, etc.) and performance (hardness, strength, slip resistance,
etc.). Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Check local building codes
prior to specification or installation to verify that product technical characteristics comply with required parameters. Final selection should be made from actual tiles
and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
The existence and dimensions of a bevel may vary from lot to lot. Be sure to request a sample of the specific lot you are planning to order, if the bevel is an important
feature of your job.
Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.
For additional information refer to “Factors to Consider” at daltile.com/Factors.
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com.
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code
reader at:
GET.DALTILE.COM
Generated by BeQRious.com
©2016 Dal-Tile Corporation (10/16)
MARBLE
THASSOS WHITE M420
12 x 12 Polished
HONEY ONYX M570
12" x 12" Polished
CEDAR ONICIATA M715
16" x 16" & 12" x 12" Polished
EMPRESS GREEN M741
12" x 12" Polished
ST. LAURENT ORIENTAL M408
12" x 12" Polished
ROJO ALICANTE M724
12" x 12" Polished
CHINA BLACK M751
12" x 12" Polished
NATURAL STONE
MARBLE