Specification Sheet

FLOOR | WALL
LINDEN POINT
™
GLAZED PORCELAIN FLOOR, GLAZED CERAMIC WALL & MOSAIC with REVEAL IMAGING
®
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
12 x 24
Floor Tile
ç
(11-13/16" x 23-13/16")
(30.00 cm x 60.48 cm)
3/8" 11.58 8
10 x 14
Wall Tile
(9-13/16" x 13-15/16")
(24.99 cm x 35.40 cm)
5/16" 14.25 15
2 x 2 Mosaic
(Dot-mounted on
12" x 24" Sheet)
(12" x 24" Sheet)
(30.48 cm x 60.96 cm Sheet)
1/4" 24.00 12
ç
This product is manufactured regionally. Slight variances in size and shading may occur
between regions. Please contact your sales representative to verify carton square
footage. As with all tile projects, be sure to purchase sufficient quantities with your
initial order.
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Special consideration needs to be given when installing tiles greater
than 15 inches.
Please refer to daltile.com/LargeTiles for more information.
Use of a latex modified thin-set is recommended for installation.
For more information, visit daltile.com.
TRIM
Type Number
Size
Pieces/
Carton
Bullnose
P-43C9 3 x 12 30
Wall Bullnose S-4310 3 x 10 54
Wall Bullnose
Corner
SN-4310 3 x 3 32
Quarter Round A-106 1 x 6 152
Quarter Round
Corner
UC-106 1 x 1 40
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2017 Daltile (12/17)
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A

Wet & Level – Interior Floor ≥ 0.42

Shower Floors (Residential or Light Commercial) ≥ 0.42 *
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A

Pool Linings N/A *
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
For more information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Floor tile suitable for exterior applications in freezing and non-freezing climates, when
proper installation methods are followed.
Wall and mosaic tile suitable for exterior applications in non-freezing climates, when
proper installation methods are followed.

Wall tile not suitable for this application.
* Mosaic tile only
INSTALLATION
Grout Joint Recommendation Shade Variation
Floor: 3/16" (Overlap should not
exceed 33% when installing tile with a
length 15" or greater in a staggered
brick-joint pattern.)
Wall: 1/16"
Mosaic: 1/8"
High (V3)
PERFORMANCE CHARACTERISTICS
ASTM#
Floor
Result
Wall
Result
Mosaic
Result
Water Absorption C373 < 0.5% < 20.0% < 3.0%
Breaking Strength C648 > 275 lbs 120-230 lbs > 250 lbs
Scratch Hardness MOHS 7.0 4.0-6.0 7.0
Chemical Resistance C650 Resistant Resistant Resistant
Abrasion Resistance C1027 4 N/A 3
For additional information on test results, visit us at:
daltile.com/information/TestResults.