Specification Sheet

SIZES
Thickness
Sq. Ft.
per Carton
Pieces Per
Carton
12 x 24ª
Field Tile
(11-13/16" x 23-13/16")
(30.00 cm x 60.48 cm)
3/8" 15.60 8
ª This product is manufactured regionally. Slight variances in size and shading may
occur between regions. Please contact your sales representative to verify carton
square footage. As with all tile projects, be sure to purchase sufficient quantities with
your initial order.
INSTALLATION
Grout Joint Recommendation Shade Variation
3/16" (overlap should not exceed 33%
when installing rectangular size in a
staggered brick-joint pattern)
High (V3)
TEST RESULTS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 275 lbs.
Scratch Hardness MOHS 7.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 4
For additional information, visit daltile.com/information/TestResults.
FLOOR APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior N/A
Wet & Level – Interior ≥ 0.42
Exterior Applications,
Pool Decking & Other Wet Areas
with Minimal Footwear
≥ 0.60
Ramps & Inclines ≥ 0.65
A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial application
in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥ 0.60 referenced in
ASTM C1028. For more information on the correlation between the two values and about
the DCOF AcuTest
™
, visit www.daltile.com/dcof.
OTHER APPLICATIONS
Suitable
Walls/Backsplashes
Countertops
Pool Linings
APPLICATION NOTES:
Suitable for exterior applications in freezing and non-freezing climates when proper
installation methods are followed.
TRIM
Type Number Size
Pieces Per
Carton
Bullnose P-43C9 3 x 12 30
Bullnose is intended to coordinate with floor field tile in the standard
90-degree installation position.
FLOOR
LINDEN POINT
™
GLAZED PORCELAIN with REVEAL IMAGING
®
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com.
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code
reader at:
GET.DALTILE.COM
Generated by BeQRious.com
©2016 Dal-Tile Corporation (5/16)
NOTES
Special consideration needs to be given when installing tiles 20" and
larger. Please refer to daltile.com/LargeTiles for more information.
Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and
trim supplied for your particular installation may not match these
samples. Final color selection should be made from actual tiles and
trim and not from tile samples or color reproductions. Manufactured
in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications
with exposure to these conditions require extra caution in product
selection. Not for use on ramps.
For additional information refer to “Factors to Consider” at
daltile.com/Factors.