Specification Sheet

SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
24 x 24
Floor Tile
(23-5/8" x 23-5/8")
(59.44 cm x 59.44 cm)
3/8" 15.20 4
12 x 24
Floor Tile
(11-5/8" x 23-5/8")
(29.56 cm x 59.44 cm)
3/8" 15.12 8
2 x 2 Mosaic
(Mesh-mounted)
(Unpolished Only)
(12" x 12" Sheet)
(30.48 cm x 30.48 cm Sheet)
3/8" 10.00 10
Random
n
Interlocking Mosaic
(Mesh-mounted)
(15" x 12" Sheet)
(38.10 cm x 30.48 cm Sheet)
3/8" 7.0 0 7
n
Available in three unique color blends only with a random mix of light polished and
unpolished pieces. Visit daltile.com/Ironcraft for more information.
INSTALLATION
Grout Joint Recommendation Shade Variation
Floor: 1/8" (3/16" when installing tile with a
length 15" or greater in a staggered
brick-joint pattern; overlap should not
exceed 33%)
Mosaic: 1/8"
Random (V4)
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Random visuals enhance the natural beauty of this product. To
achieve optimal results, all tile should be selected from multiple
cartons and shading and graphic arrangement planned prior to
installation.
Special consideration needs to be given when installing tiles greater
than 15 inches. Please refer to daltile.com/LargeTiles for more
information.
Special care should be taken when grouting with dark pigmented
colors. A grout release is recommended to prevent finely powdered
pigments from lodging in the pores of the surface. Use of a latex
modified thin-set is recommended for installation.
FLOOR
IRONCRAFT
™
COLORBODY
™
PORCELAIN with REVEAL IMAGING
®
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2017 Daltile (4/17)
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code
reader at:
GET.DALTILE.COM
Generated by BeQRious.com
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42 *
Shower Floors (Residential or Light Commercial) ≥ 0.42
**
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A **
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
For more information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Mosaics and floor tile are suitable for many residential and commercial floors; in addition,
mosaics are also suitable for residential and light commercial shower floors.
Suitable for exterior applications in freezing and non-freezing climates, when proper
installation methods are followed.
* Unpolished floor tile and mosaics suitable.
** 2 x 2 mosaic tile only.
TRIM
Type Number Size
Pieces/
Carton
Bullnose P-43C9 3 x 12 30
Cove Base P-36C9T 6 x 12 22
Cove Base
Outcorner
PC-36C9T 1 x 6 15
Bullnose, cove base and cove base corner trim are available in
unpolished finish only. Bullnose in light polished finish is available
through special order with extended lead time.
Floor bullnose and cove base trim are intended to coordinate with
floor tile in the standard 90-degree installation position.
Cove base and cove corner trim are suitable for non-freezing
climates only.
PERFORMANCE CHARACTERISTICS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 275 lbs
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 N/A
For additional information on test results, visit us at:
daltile.com/information/TestResults.