Specification Sheet

SIZES
SQ.FT.
CARTON
PIECES PER
CARTON
18 x 18 Field Tile
(17-3/4” x 17-3/4”)
(45.2 cm x 45.2 cm)
18.00 8
12 x 12 Field Tile
(11-13/16” x 11-13/16”)
(30.0 cm x 30.0 cm)
11.00 11
9 x 12 Wall Tile*
(8-15/16” x 11-15/16”)
(22.7 cm x 30.3 cm)
11.25 15
6 x 6 Wall Tile*
(6” x 6”)
(15.2 cm x 15.2 cm)
12.50 50
3 x 6 Wall Tile*
(3” x 6”)
(7.6 cm x 15.2 cm)
12.50 100
2 x 2 Mosaic**
(Dot-mounted
on a 1’ x 2’ sheet)
(1-15/16” x 1-15/16”)
(4.9 cm x 4.9 cm)
24.00 12
4 x 12 Floor Border s
(4-1/16” x 11-3/4”)
(10.3 cm x 29.9 cm)
-- 10
2 x 10 Wall Border n
(1-7/8” x 10”)
(4.76 cm x 25.8 cm)
-- 10
* Wall tile available in HL01, HL02, HL03 and HL04 only.
** Sunrise Mosaic blend is random 50% HL01 White Rock and 50% HL02Raa;
Sunset Mosaic Blend is random 30% HL03 Amber, 30% HL04 Edgewood, 20%
HL05 Ashland, and 20% HL06 Sage.
s
Sunrise Border is HL01 White Rock, Hl02 Rafia, and HL04 Edgewood; Sunset Border
is HL03 Amber, HL04 Edgewood, HL05 Ashland, and HL06 Sage.
n
Universal HL09 Wall Border is natural stone and glass blend.
COMMERCIAL USAGE
INTERIOR EXTERIOR
RESIDENTIAL
LIGHT
COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios
Walls/Backsplashes
Countertops
Pool Decking
Pool Linings
Suitable for exterior applications in non-freezing climates only when proper installation
methods are followed.
* Wall field tile also suitable on residential bathroom floors not subject to outside foot
trac, excluding wall accent.
RESIDENTIAL USAGE
FLOORS WALLS COUNTERTOPS
EXTERIOR
PATIOS
EXTERIOR POOL
DECKS
F W C EP ED
NOTES
Since there are variations in all fired ceramic products, tile and trim supplied for your
particular installation may not match these samples. Final color selection should be made
from actual tiles and trim and not from tile and trim samples or color reproductions.
Manufactured in accordance with ANSI A 137.1 standards.
For additional information, refer to “Factors to Consider” at www.daltile.com/CommercialFactors.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to
these conditions require extra caution in product selection. Not for use on ramps.
TRIM
TYPE NUMBER SIZE
PCS. PER
CARTON
Bullnose P-43C9 3 x 12 22
Bullnose* S-4669 6 x 6 50
Bullnose Corner* SCRL-4669 6 x 6 50
Surface Bullnose* S-4269 2 x 6 100
Surface Bullnose Outcorner* SN-4269 2 x 2 50
Radius Bullnose* A-4200 2 x 6 100
Radius Bullnose Corner* AN-4200 2 x 2 20
Bullnose * S-4309 3 x 9 54
Bullnose Corner* SN-4309 3 x 3 32
Counter Rail* 26-CRWL 2 x 6 36
Counter Rail Corner* 22-CRCN 2 x 2 24
Quarter Round* A-106 1 x 6 152
Quarter Round* Corner UC-106 1 x 1 40
Mosaic Bullnose S-886 2 x 2 108
Cove Base P-36C9TB 6 x 12 22
Cove Corner PC-36C9TB 1 x 6 15
*Wall trim available in HL01, HL02, HL03 and HL04 only.
SHADE VARIATION
HIGH (V3)
Color variation from tile to tile and within each tile.
INSTALLATION
THICKNESS GROUT JOINT RECOMMENDATION
5/16" (Floor andWall),
1/4" (Mosaics)
3/16" (Floor), 1/16" (Wall), 1/8" (Mosaics)
TEST RESULTS
(Floor tile only)
ASTM# FLOOR/MOSAIC RESULT WALL RESULT
Water Absorption C373 < 3.0% < 20.0%
Breaking Strength C648 250 lbs 120-230 lbs
Scratch Hardness MOHS 8.0 4.0-6.5
Chemical Resistance C650 Resistant Resistant
Coecient of Friction C1028
Wet: ≥ 0.60
Dry: ≥ 0.65
Wet: < 0.50
Dry: ≥ 0.80
Abrasion Resistance C1027
4 --
SLIP RESISTANCE (WET) : 3
The higher the rating, the higher the slip resistance.
1 < .50
2 .50 - .59
3 ≥ .60