Specifications

SIZES
Thickness
Sq. Ft.
per Carton
Pieces per
Carton
18 x 18
Field Tile
(17-13/16" x 17-13/16")
(45.20 cm x 45.20 cm)
5/16" 17.60 8
12 x 24
Field Tile
(11-13/16" x 23-13/16")
(30.00 cm x 60.00 cm)
3/8" 15.60 8
12 x 12
Field Tile
(11-13/16" x 11-13/16")
(30.00 cm x 30.00 cm)
5/16" 14.55 15
10 x 14
Wall Tile
(9-13/16" x 13-15/16")
(24.99 cm x 35.40 cm)
5/16" 14.55 15
2 x 4
Brick-joint
Mosaic
(12" x 12" Sheet)
(30.48 cm x 30.48 cm
Sheet)
1/4" 9.96 12
INSTALLATION
Grout Joint Recommendation Shade Variation
Floor: 3/16" (overlap should not
exceed 33% when installing in a
staggered brick-joint pattern)
Wall : 1/16"
Mosaic : 1/8"
High (V3)
TEST RESULTS
ASTM#
Floor
Result
Wall
Result
Mosaic
Result
Water Absorption C373 < 0.5% < 20.0% < 3.0%
Breaking Strength C648 > 275 lbs. 120-230 lbs. > 250 lbs.
Scratch Hardness MOHS 8.0 4.0-6.0 8.0
Chemical Resistance C650 Resistant Resistant Resistant
Abrasion Resistance C1027 4 N/A 4
For additional information, visit daltile.com/information/TestResults.
NOTES
Special consideration needs to be given when installing tiles greater
than 15 inches. Please refer to daltile.com/LargeTiles for more
information.
Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and
trim supplied for your particular installation may not match these
samples. Final color selection should be made from actual tiles and
trim and not from tile samples or color reproductions. Manufactured
in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications
with exposure to these conditions require extra caution in product
selection. Not for use on ramps.
For additional information refer to “Factors to Consider” at
daltile.com/Factors.
FLOOR APPLICATIONS
(Excludes Wall Tile)
Target
DCOF wet
Suitable
Dry & Level – Interior N/A
Wet & Level – Interior ≥ 0.42
Exterior Applications;
Pool Decking & Other Wet Areas
with Minimal Footwear
≥ 0.60
Ramps & Inclines ≥ 0.65
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
OTHER APPLICATIONS
Suitable
Walls/Backsplashes
Countertops *
Pool Linings
*
APPLICATION NOTES:
* Mosaic only
Floor tile suitable for exterior applications in freezing and non-freezing climates when
proper installation methods are followed.
Wall tile and mosaic suitable for exterior applications in non-freezing climates only when
proper installation methods are followed.
TRIM
Type Number Size
Pieces per
Carton
Floor Bullnose P-43C9 3 x 12 22
Wall Bullnose
(10" side)
S-4310 3 x 10 54
Wall Bullnose
Corner
SN-4310 3 x 3 32
Floor bullnose trim is intended to coordinate with floor field tile in the
standard 90-degree installation position. Trim is suitable for exterior
application in non-freezing climates only.
FLOOR | WALL
AVONDALE
™
GLAZED PORCELAIN FLOOR & GLAZED CERAMIC WALL & MOSAIC with REVEAL IMAGING
®
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2016 Dal-Tile Corporation (7/16)
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code
reader at:
GET.DALTILE.COM
Generated by BeQRious.com