Sales Sheet

WALL
LINEAR
COLOR WHEEL
™
COLLECTION  GLAZED CERAMIC
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2019 Daltile (1/19)
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
8 x 24
Wall Tile
(8" x 24")
(20.34 cm x 61.03 cm)
3/8"
(9.3 mm)
13.30 10
6 x 18
Wall Tile
(6" x 18")
(15.25 cm x 45.76 cm)
3/8"
(9.3 mm)
11.25 15
4 x 16
Wall Tile
(4" x 16")
(10.17 cm x 40.68 cm)
3/8"
(9.3 mm)
13.20 30
4 x 12
Wall Tile
(4-1/4" x 12-7/8")
(10.91 cm x 32.77 cm)
5/16"
(7.9 mm)
10.64 28
4 x 8
Wall Tile
(4-1/4" x 8-9/16")
(10.91 cm x 21.82 cm)
5/16"
(7.9 mm)
10.63 42
2 x 8
Wall Tile
(2-1/8" x 8-9/16")
(5.45 cm x 21.82 cm)
5/16"
(7.9 mm)
10.40 80
TRIM
Type Number Size
Pieces/
Carton
Jolly S-1/212J 1/2 x 11-15/16 12
Wall Bullnose S-44D9 4 x 16 24
Wall Bullnose
Corner
SN-44D9 4 x 4 20
Wall Bullnose S-44C9MOD 4-1/4 x 12-7/8 28
Wall Bullnose S-4489MOD 4-1/4 x 8-9/16 42
Wall Bullnose
Corner
SCRL-4449 4-1/4 x 4-1/4 100
Wall Bullnose S-4289MOD 2-1/8 x 8-9/16 80
Wall Bullnose
Corner
SN-4289M 2-1/8 x 2-1/8 25
Flat Top Cove
Base
A34C1MOD 4-1/4 x 12-7/8 40
INSTALLATION
Grout Joint Recommendation Shade Variation
6 x 18 & 8 x 24: 1/16" (1/8" when rectangular
size is installed in a staggered brick-joint
pattern; overlap should not exceed 33%.)
2 x 8, 4 x 12, & 4 x 16: 1/16" (When rectangular
size is installed in a staggered brick joint
pattern, overlap should not exceed 33%.)
4 x 8: 1/16"
Low (V1)
PERFORMANCE CHARACTERISTICS
ASTM# Result
Water Absorption C373 < 20.0%
Breaking Strength C648 120-230 lbs
Scratch Hardness MOHS 4.0-6.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 N/A
For additional information on test results, visit us at:
daltile.com/information/TestResults.
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
For more information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications in non-freezing climates, when proper installation
methods are followed.