User`s manual

4M30 Camera User’s Manual 8
DALSA 03-32-10030-03
Physical
Characteristics
Units Notes
-5 Input Voltage V - 4.975 - 5.025
Nominal Gain Range 1x 10x
Calibration
Conditions
Units
Setting Min. Max.
Data Rate MHz 4x40 4x40 4x40
+15 Input Voltage V +15 +14.925 +15.075
+5 Input Voltage V +5 +4.975 +5.025
-5 Input Voltage V - 5 - 4.975 - 5.025
Ambient Temperature °C 25
Gain X 1x
Electro-Optical
Specifications
Units
Min. Typical Max.
Dynamic Range dB 64.0 67.0 1
Pixel Response Non-
Uniformity
%rms 2.0 3.0 2, 4
System Noise DN(rms) 2.1 2.4
Notes:
1. Dynamic Range = 20 * log10[(Counts @ Full Well)/Read Noise]
2. PRNU = [[[STDEV(100 frames @ saturation)/(MEAN @ saturation)]-Dark Offset(in
darkness)]*100
3. System Noise = Read Noise (e
-
)/Gain (e
-
/DN) dark measurement
4. Specification not applicable to the DS-45-04M30 due to Lumogen coated sensor