User`s manual

4M30 Camera User’s Manual 20
DALSA 03-32-10030-03
3.2 ADC Commands
Table 13: Summary of ADC Commands
Control Write Command Read Command Channel Function
Hex Binary Hex Binary
ADC Board
Soft Reset
*0h 00** 0000 NA NA 1,2,3,4 Resets ADC board
only
*2h 00** 0010 *2h 01** 0010 1,2,3,4 LS byte of 16 bit
user controllable
offset
User Offset
*3h 00** 0011 *3h 01** 0011 1,2,3,4 MS byte of 16 bit
user controllable
offset
*5h 00** 0101 *5h 01** 0101 1,2,3,4 LS byte of 16 bit
gain
User Gain
*6h 00** 0110 *6h 01** 0110 1,2,3,4 MS byte of 16 bit
gain
AOC *8h 00** 1000 NA NA 1,2,3,4 AOC Adjustment
3.3 Clock Commands
Table 14: Summary of Clock Commands
Control Write Command Read Command Channel Function
Hex Binary Hex Binary
Reset
Camera
80h 1000 0000 NA NA 1,2,3,4 Resets all registers
to default values
Read
Camera
Type
NA NA C3h 1100 0011 1,2,3,4 Returns Camera ID
register (4Bh)
Read
Firmware
Rev
NA NA C5h 1100 0101 1,2,3,4 Returns Firmware
revision register
Control
Register
82h 1000 0010 C2h 1100 0010 1,2,3,4 Control Register
settings
8Ah 1000 1010 NA NA NA Write byte 0 of 18
bit integration time
8Bh 1000 1011 NA NA NA Write byte 1 of 18
bit integration time
Integration
Time
8Ch 1000 1100 NA NA NA Write byte 2 of 18
bit integration time
8Dh 1000 1101 NA NA NA Write byte 0 of 18
bit frame rate time
8Eh 1000 1110 NA NA NA Write byte 1 of 18
bit frame rate time
Frame Rate
8Fh 1000 1111 NA NA NA Write byte 2 of 18
bit frame rate time
* Reference Table 11 for
appropriate entry